MDPE 90 mm Connection kit to 110mm pipe

Inc Tax £155.99
MDPE 90 mm Connection kit to 110mm pipe Specially made up for easy install
You will earn 155 points with this purchase
MDPE 90mm Connection kit to sewer   (Example of made up for easy install see Picture)

MDPE 90 mm Connection kit to 110mm pipe

The "kit" is a 90 mm MDPE connection to male 4" push fit connector

JTPumps range of MDPE Pipe Fittings in stock giving customers the ability to design and install a pipe system which will fulfil the needs of their specific application. All of our MDPE Pipe Fittings are high quality, simple to install and available today. The kits come made up straight from our workshop (note in picture the black length of 110mm pipe is there to show you how it fits on to it)

The picture that is displayed on our website is a generic picture of a 63mm sewer connection kit, when it comes to the 90mm connection we have to make it more robust by using brass fittings and extra sealant, the plug socket itself will fit over standard 4” soil pipe and will need to be solvent welded into place, so you will need a little off cut of soil pipe if inserting in to a underground chamber, if not it will fit over the 110mm pipe.

Key Facts:
·         We stock sizes 63mm - 90mm
·         Pressure Rating of 16 BAR
·         These are compression fittings
·         High quality European manufacturing
·         Suitable to be used with Metric  MDPE Pipe Black
·         Conform to various quality and environmental standards
·         Easy to fit
The body of MDPE Pipe Fittings are made from Black Polypropylene (PP) which is a tough and durable, lightweight thermoplastic which has good chemical resistance, good shock and drop resistance and is also resistant against stress cracking.

Our MDPE Pipe Fittings have a Safety Factor of 3 ensuring that spikes in water pressure within a water pipe system are catered for.

Basic Fitting Instructions:
These great MDPE Pipe Fittings are not only high quality, they are also simple to use. You can read the basic fitting instructions below though we always recommend reading the manufacturer’s instructions for a more detailed overview:

1.       Loosen off the retaining nut.
2.       Insert an MDPE Pipe Liner into the pipe
3.       Push the pipe past the O ring until you hit the stop
4.       Tighten the nut with a Universal Strap Wrench

You’re done! It really is as simple as that.

Standards & Approvals:
All the MDPE Pipe Fittings have been manufactured in conformity to standards:

·         UNI 9561-9562
·         UNI EN 712-713-715
·         UNI ISO 7/1
·         ISO 14236
·         UNI 2233

product images are for illustrative purposes only


Write a review and let shoppers know what you think of this product.

Brand JTPumps
Weight 0.5kg