Manual JT500 (Gi) grey water pump (7m lift) replacement for the telka
These 240/1/50 pumps are designed for handling clean, dirty or slightly polluted water. They feature an integral float switch, making them particularly useful for tight sump and restricted access applications.
At the flick of a switch, these models can be locked into either automatic or manual operation. In automatic mode the pump will start at approx. 115mm and pump down to a level of approx. 55mm. On manual, the pump will pump down to 9mm, but should not be left unattended to run dry.
• Built-in thermal protection with auto reset
• Suitable for continuous duty up to 35°C
• Open impeller for 9mm soft solids passage
• 10m H07RN-F cable and plug as standard
• Supplied with non-return valve and variable hosetail as standard.
The JT500 is designed for heavy duty applications using antioxidant and corrosion resistant materials.
Pump casing, body and impeller in PPS (Polyphenylene Sulphide)
Stainless steel motor casing/shaft.
Special wear resistant shaft coating.
Special triple shaft seal.
Comes with Variable dia. Hosetails with build in non-return valve
Write a review and let shoppers know what you think of this product.