JTResPal Auto 230v Auto Puddle / Floor Sucker 1mm

JTResPal 400 / 750 Auto Puddle sucker Now comes with Level Sensor turning it into an Auto Pump

Residue drainage pump for pumping down to 1mm

Available in 230v single phase models the JTResPal 400 / 750 Auto residue drainage pump is designed for handling nuisance water found on flat surfaces and will pump down to 1mm. It features a stainless steel outer cover and handle, with NBR suction bace, FC20 cast irion pump housing and ADC12 alloy motor housing and seal casing. The highly abrasion resistant Hytrel vortex impeller reduces wear and maintains reliability. Comes with a Level sensor (see Blue/Black box Photo)


Nominal 400W (0.5HP)  Or 750W 
2850 RPM
230V = 3Amp
Double mechanical seal in oil chamber - SIC/SIC
Internal capacitor
10 metre HO7RN-F cable as standard
Discharge 2" Hosetail
Wieght 12Kg
Base thick rubber with small holes is to suck up water
Can handle sand and grit
Sucks down to 1mm
Single Phase Control (to be mounted in dry area)
Flood monitor
Floor sensor
Can run on up to 60 seconds to get every last drop of water up
Adjustable sensitivity on conductivity circuit
LED indication for mains healthy and pump running / relay active
Start pumping at 13 or 51 mm and stop at 1 to 14mm

High level alarm build in

input 240v

JTResPal 400 3.0 amp

JTResPal 750  6.3 amp

Avainable in 400v Ask for a quote