JTResPal 400 Auto 230v or 110v  Auto Puddle / Floor Sucker 1mm
JTResPal 400 Auto 230v or 110v  Auto Puddle / Floor Sucker 1mm
JTResPal 400 Auto 230v or 110v  Auto Puddle / Floor Sucker 1mm
JTResPal 400 Auto 230v or 110v  Auto Puddle / Floor Sucker 1mm
JTResPal 400 Auto 230v or 110v  Auto Puddle / Floor Sucker 1mm

JTResPal 400 Auto 230v or 110v Auto Puddle / Floor Sucker 1mm

£759.99
Inc Tax £911.99
JTResPal 400 Auto Residue drainage pump for pumping automatically down to 1mm 240v or 110v on a flat surface
You will earn 911 points with this purchase
JTResPal 400 Auto Puddle sucker Now comes with Level Sensor turning it into an Auto Pump

Residue drainage pump for pumping down to 1mm


Available in both 110v and 230v single phase models the JTResPal 400 Auto residue drainage pump is designed for handling nuisance water found on flat surfaces and will pump down to 1mm. It features a stainless steel outer cover and handle, with NBR suction bace, FC20 cast irion pump housing and ADC12 alloy motor housing and seal casing. The highly abrasion resistant Hytrel vortex impeller reduces wear and maintains reliability. Comes with a Level sensor (see Blue box Photo)


Nominal 400W (0.5HP)
2850 RPM
110v = 6Amp OR 230V = 3Amp
Double mechanical seal in oil chamber - SIC/SIC
Auto reset thermal protector
Internal capacitor
10 metre HO7RN-F cable as standard
Discharge 2" Hosetail
Wieght 12Kg
Base thick rubber with small holes is to suck up water
Can handle sand and grit
Sucks down to 1mm
Single Phase Control (to be mounted in dry area)
Dry run Sensor
Flood monitor
Floor sensor
Run on timer - Can run on up to 60 seconds to get every last drop of water up
Adjustable sensitivity on conductivity circuit
LED indication for mains healthy and pump running / relay active
Start pumping at 39mm and stop at 14mm with option of upto 1 minute dry run (timer Selector - sucks the remaining water away)
input 240v or 110v





 

Reviews

Write a review and let shoppers know what you think of this product.

Brand JTPumps
Weight 7kg
MPN PH400230WV