-539-1-p.jpg?v=B765B488-CC98-41CB-A82D-38E352F7246F)
-539-1-p.jpg?v=F576C065-7BE5-4242-9149-327FAB3A6564)
-539-1-p.jpg?v=2FAC68E0-9AC7-434B-9F90-1A5A55BFC512)
-539-1-p.jpg?v=9EB1E2AB-F583-4223-B214-EB136AC8BC08)
JTPuddle / Floor Sucker pump manual 110v Drains to 1mm
£299.99
Inc Tax £359.99
The JTPuddle / Floor Sucker pump manual 240v or 110v is an all round semi professional and highly portable residue pump
You will earn 359 points with this purchase
The JTPuddle / Floor Sucker pump manual 110v or 240v is an all round semi professional and highly portable residue pump, designed for clean water in domestic applications for example, rooms, garages and cellars. Requires a minimum of 5mm of water to operate, prime and start to pump. One inch male top outlet complete with 1" 3/4" 1/2" step adapter female hose tail. Plastic outer cover, lower motor/bearing housing, impeller, pump housing and strainer. Single silicon mechanical seal in a lubricated chamber with single oil seal in the media. Complete with ten metres of power cable. These pumps must not be installed/left laying on their side.
The JTPuddle Pump new generation, able to drain down to 1mm. Designed to start pumping at a very low water level. The anti-airlock prevents the JTPuddle-Floor pump from air locking. The oil filled motor, provides perfect cooling which enables the pump to run dry for prolonged periods. The use of strong and flexible elastomers makes the pump very light weight while providing a strong and rugged pump suitable for semi-professional use. The JTPuddle pump’s high delivery volume (120 l/m) coupled to a high delivery head of (7m) makes the unit suitable for a variety of different applications. The professional design allows for easy maintenance.
The small footprint of the JTPuddle pump allows for easy installation is small and narrow spaces.
JTPuddle Pump
Max L/m - 120
Max Head m - 7
kW - 0.15
260mm High x 138mm W
110v or 240v
Drains down to 1mm
***In addition to the JTPuddle pump, a standard drainage strainer is supplied to make the pump ideally suited for multi purpose use.***
Also recommend 10m of 1” Green Suction Hose + 1” clip
The JTPuddle Pump new generation, able to drain down to 1mm. Designed to start pumping at a very low water level. The anti-airlock prevents the JTPuddle-Floor pump from air locking. The oil filled motor, provides perfect cooling which enables the pump to run dry for prolonged periods. The use of strong and flexible elastomers makes the pump very light weight while providing a strong and rugged pump suitable for semi-professional use. The JTPuddle pump’s high delivery volume (120 l/m) coupled to a high delivery head of (7m) makes the unit suitable for a variety of different applications. The professional design allows for easy maintenance.
The small footprint of the JTPuddle pump allows for easy installation is small and narrow spaces.
JTPuddle Pump
Max L/m - 120
Max Head m - 7
kW - 0.15
260mm High x 138mm W
110v or 240v
Drains down to 1mm
***In addition to the JTPuddle pump, a standard drainage strainer is supplied to make the pump ideally suited for multi purpose use.***
Also recommend 10m of 1” Green Suction Hose + 1” clip
| Brand | JTPumps |
| Weight | 10kg |
| MPN | JTPuddle1mm |