JTFS Effluent Pumping Stations 150L
JTFS Effluent are Pre-assembled Package Pumping stations for the removal of clean / grey / effluent water where gravity flow is not possible Single and Twin JTFS Effluent package pump stations for the removal of effluent from sewage treatment plants and also surface water.
Simple to install. To handle clean, dirty or slightly polluted water. Ideal for pumping effluent from septic tanks or sewage treatment plants, but can also be used for cellars, small sumps and pumping out rain water.
The standard pumping station has a single Oliju R35.60 submersible pump
This Smallest Single JTFS Effluent 150L Pumping Station is a pre-assembled, ready to use package pumping station suitable for the handling of clean, grey or effluent water.
Suitable for Removing Grey Water From:
Final Effluent from Sewage Treatment Plant
Drainage of Cellars & Basements
Kitchens, Dishwashers, Sinks and Showers
Surface and Nuisance Water Drainage
600mm Diameter x 500mm
Pump with float
up to 14m lift
10 metres of cable
150 Litre total capacity
Pedestrian rated cover
110 mm inlet (drill on site)
Internal pipework 1 1/4" Pipework and fittings complete
Non return valve
Available for Next Working Day delivery
There must be 470mm below the bottom of the inlet pipe to allow for the pump to operate.
Effluent Pumping Stations include:
1 x. 600 mm diameter x 500 mm deep GRP chamber.
1 x. 32mm automatic (Suspended solids 5mm max) handling pump.
1 x. non-return valve valve.
1 x. pedestrian rated cover
1 x. 32mm outlet adaptor to connect to MDPE
An alarm is recommended for this unit.
Write a review and let shoppers know what you think of this product.