JTFS Basement Pumping Stations 150L (1)
JTFS Basement is Basement (Cellar) drainage systems pumping stations they come Pre-assembled for the removal of clean, grey water and Surface water where gravity flow is not possible
This small only 610mm x 500mm (150L) is great for small job's.
Part of keeping your cellar or basement dry involves a water sump pump. Basement System JTFS Basement is specifically designed just for smaller spaces and applications.
Simple to install. To handle clean, dirty or slightly polluted water. Ideal for pumping effluent from septic tanks or sewage treatment plants, but can also be used for cellars, small sumps and pumping out rain water.
The standard pumping station has a single Oliju R35.60 submersible pump
This Smallest Single JTFS Basement 150L Pumping Station is a pre-assembled, ready to use package pumping station suitable for the handling of clean, grey or surface water.
Suitable for Removing Grey Water From:
Drainage of Cellars & Basements, Cavity Walls,
Final Effluent from Sewage Treatment Plant
Kitchens, Dishwashers, Sinks and Showers,
Surface and Nuisance Water Drainage.
600mm Diameter x 500mm
Pump with float
up to 14m lift
10 metres of cable
150 Litre total capacity
Pedestrian rated cover
110 mm inlet (drill on site)
Internal pipework 1 1/4" Pipework and fittings complete
Non return valve
Available for Next Working Day delivery
There must be 470mm below the bottom of the inlet pipe to allow for the pump to operate.
Basement Pumping Stations include:
1 x. 600 mm diameter x 500 mm deep GRP chamber.
1 x. 32mm automatic (Suspended solids 5mm max) handling pump.
1 x. non-return valve valve.
1 x. pedestrian rated cover
1 x. 32mm outlet adaptor to connect to MDPE
An alarm is recommended for this unit.
Write a review and let shoppers know what you think of this product.