-993-p.jpg?v=25A25EF5-0203-42B5-9635-921491D9D436)
-993-p.jpg?v=CDDAD3A6-2A0F-4AFC-AA26-A04C87E6E852)
-993-p.jpg?v=1A803A0D-410C-4DC6-AEE4-D99F489FFD9B)
-989-p.jpg?v=BC51CEAE-0F05-4F48-9FF3-E4A5605581B1)
JTFLOOD2 up to 325 Litres per Min Max
£724.99
Inc Tax £869.99
The JTFlood2 is a small Surface Water pump station suitable for extensions, garden rooms and small applications. Job ready for easy installation with Flood relief
You will earn 869 points with this purchase
The JTFlood2 Surface water up to 5 Litres per second. Packaged pumping station is an easy to install “job ready” package suitable for domestic or commercial drainage applications where gravity flow is not available.
The high Flow F series pumps have been designed to
handle clean, dirty or slightly polluted water. Used for flood relief and Storm relief. Feature vortex impeller Nominal 0.37kW (230V=4.2Amp) Cast iron/Stainless steel construction with float switch, Mechanical seal and lip seal Coolant filled motor 10 metre cable
Flood Defence APPROVED Specified Sump Pump System only @ JTPumps
FEATURES:
Engine oil bath, insulation class F Double seals, lip seals and reinforced carbon ceramic mechanical seal Power cable: 10 m neoprene Motor casing in stainless steel, 304 stainless steel open impeller Pump body in cast iron, 420 stainless steel shaft continuous service.
Made in Portugal E.U.
1 x Submersible Pump
50mm Solid handling
8m Head
Tank Features
610mm x 635mm polyethylene moulded chamber
190 litre capacity
Non-return valve
Anti-flotation device helps to eliminate chamber
from floating. 2"BSP threaded outlet easy connect
MDPE pipework Supplied with 1no.110mm seal
(inlet to be drilled on site.)
Job ready for Easy Installation
Other size options call JTPumps office for quote
The high Flow F series pumps have been designed to
handle clean, dirty or slightly polluted water. Used for flood relief and Storm relief. Feature vortex impeller Nominal 0.37kW (230V=4.2Amp) Cast iron/Stainless steel construction with float switch, Mechanical seal and lip seal Coolant filled motor 10 metre cable
Flood Defence APPROVED Specified Sump Pump System only @ JTPumps
FEATURES:
Engine oil bath, insulation class F Double seals, lip seals and reinforced carbon ceramic mechanical seal Power cable: 10 m neoprene Motor casing in stainless steel, 304 stainless steel open impeller Pump body in cast iron, 420 stainless steel shaft continuous service.
Made in Portugal E.U.
1 x Submersible Pump
50mm Solid handling
8m Head
Tank Features
610mm x 635mm polyethylene moulded chamber
190 litre capacity
Non-return valve
Anti-flotation device helps to eliminate chamber
from floating. 2"BSP threaded outlet easy connect
MDPE pipework Supplied with 1no.110mm seal
(inlet to be drilled on site.)
Job ready for Easy Installation
Other size options call JTPumps office for quote
| Depth mm | Diameter mm | Capacity L | Size Inch | Call Office |
| 635 | 610 | 190 | 2 | see above |
| 1000 | 610 | 300 | 2 | P.O.A. |
| 1500 | 610 | 450 | 2 | P.O.A. |
| 2000 | 610 | 600 | 2 | P.O.A. |
| Brand | JTPumps |
| Weight | 35kg |
| MPN | JTFLOOD27190L |
You may also like
-
25m Roll MDPE flexi pipe 63mm (2inch)
£265.0025m Roll MDPE flexi pipe 63mm (2inch) For when you have to lay long runs of pipe make life easier by buying it in 25 meter lenths -
110mm Rubber Wall Seal
£25.99110mm Rubber Wall Seal (4") Wall seal comes with all of the package pumping stations but some times you need more than one on a job so just add as many as you need -
-
JT High Water Alarm with Battery Backup
£269.99JT High Water Alarm with Battery Backup & Conventional float 5m PVC cable