-448-p.jpg?v=4D6EE38C-C512-46DE-B545-FA8EBB4D486D)
-448-p.jpg?v=FD333552-B938-43CC-94BF-FF0B13CB4073)
-448-p.jpg?v=7256F325-95C9-4545-A385-037A86CCD786)
-448-p.jpg?v=F45EAA79-DDAF-4D03-A1D7-76A82775F2E6)
JC240 Automatic Floor / Sucker Pump 8m head
£559.99
Inc Tax £671.99
Low Suction Pump with Automatic Level Sensor for Flood Protection Automatic drainage at low water level from 5 mm to prevent flooding in rooms without pump pit or floor drain, e. g. by flood water, rain, defective water pipe or defective washing machine.
You will earn 671 points with this purchase
Due to high volume sales on this pump there could be a delay on delivery of this pump
Low Suction Pump with Automatic Level Sensor for Flood Protection
Automatic drainage at low water level from 5 mm to prevent flooding in rooms without pump pit or floor drain, e. g. by flood water, rain, defective water pipe or defective washing machine. The level sensor starts the pump automatically at a water level of 5 mm and pumps down to 2 mm remaining level. The water jacket cooled motor with the top discharge protects the motor against overheating even during sip operation.
Installation: Permanent or transportable.
Pumped medium: Clear water or drainage water containing soft solids with maximum diameter of 4mm.
Max medium temperature: 35c, short term up to 60 c (suitable for clean water only no solids or abrasive materials)
Operation: Intermittent.
Design
Fully submersible drainage pump
Consisting of:
Pump: Single stage centrifugal pump with vertical discharge BSP 1“M.
Impeller: Open multi-channel impeller, spherical clearance 4 mm.
Motor: Fully submersible, pressure tight electric motor.
Stainless steel motor housing. Insulation class B. Motor protection IP 68.
Thermal sensors imbedded in the motor winding.
Shaft/bearing: Large diameter stainless steel rotor shaft, pre-lubricated bearings.
Seals: Triple lip-seal combination.
Protected by German patent
Speed: 2900 rpm
Discharge: BSP 1“M
Materials:
Motor housing, motor shaft, screws - Stainless steel
Suction sieve Pump housing - Wear resistant synthetic material (composite)
Impeller, - Glass-fibre, pressure cover reinforced synthetic material (com)
Equipment supplied - Pump with level sensor, 10 m of cable and plug.
Low Suction Pump with Automatic Level Sensor for Flood Protection
Automatic drainage at low water level from 5 mm to prevent flooding in rooms without pump pit or floor drain, e. g. by flood water, rain, defective water pipe or defective washing machine. The level sensor starts the pump automatically at a water level of 5 mm and pumps down to 2 mm remaining level. The water jacket cooled motor with the top discharge protects the motor against overheating even during sip operation.
Installation: Permanent or transportable.
Pumped medium: Clear water or drainage water containing soft solids with maximum diameter of 4mm.
Max medium temperature: 35c, short term up to 60 c (suitable for clean water only no solids or abrasive materials)
Operation: Intermittent.
Design
Fully submersible drainage pump
Consisting of:
Pump: Single stage centrifugal pump with vertical discharge BSP 1“M.
Impeller: Open multi-channel impeller, spherical clearance 4 mm.
Motor: Fully submersible, pressure tight electric motor.
Stainless steel motor housing. Insulation class B. Motor protection IP 68.
Thermal sensors imbedded in the motor winding.
Shaft/bearing: Large diameter stainless steel rotor shaft, pre-lubricated bearings.
Seals: Triple lip-seal combination.
Protected by German patent
Speed: 2900 rpm
Discharge: BSP 1“M
Materials:
Motor housing, motor shaft, screws - Stainless steel
Suction sieve Pump housing - Wear resistant synthetic material (composite)
Impeller, - Glass-fibre, pressure cover reinforced synthetic material (com)
Equipment supplied - Pump with level sensor, 10 m of cable and plug.
| Brand | JTPumps |
| Weight | 20kg |
| MPN | Sucker7M |